Sheet Metal Workers and Tri County A/C - Sheet Metal Contractors Apprenticeship
Sheet Metal Workers and Tri County A/C - Sheet Metal Contra · Ventura, CA
- Cost
- $0
- Length
- 99 weeks
- Working 6 months later
- Not reported
Program names, program descriptions and occupation titles appear here in English, because that is the only language the federal and state records publish them in. Everything else on this page is translated.
What happened to people who took this
No outcomes reported for this program
About a third of California programs report nothing. That is a fact about the program's reporting, not evidence that it works or does not.
The job this trains for
This describes the jobs people do, not the classes this program teaches. It comes from the U.S. Department of Labor, which asks people already doing the work. The Department publishes it in English only, so the job names and the sentences below stay in English on this page.
Where California publishes a separate figure for Oxnard-Thousand Oaks-Ventura MSA (Ventura County), it appears beneath the statewide one. Statewide stays the headline: people who train here do not necessarily work here.
Sheet Metal Workers
Job ads may call this: Field Installer · Sheet Metal Worker · Sheet Metal Mechanic · Sheet Metal Installer
Some of what people in this job do. The Department rates how important each one is, and they appear in that order.
- Inspect individual parts, assemblies, or installations, using measuring instruments, such as calipers, scales, or micrometers.
- Maintain equipment, making repairs or modifications when necessary.
- Fabricate ducts for high efficiency heating, ventilating, and air conditioning (HVAC) systems to maximize efficiency of systems.
- Fasten seams or joints together with welds, bolts, cement, rivets, solder, caulks, metal drive clips, or bonds to assemble components into products or to repair sheet metal items.
Show 2 more things this job involves
- Transport prefabricated parts to construction sites for assembly and installation.
- Install assemblies, such as flashing, pipes, tubes, heating and air conditioning ducts, furnace casings, rain gutters, or downspouts in supportive frameworks.
What this pays in Oxnard-Thousand Oaks-Ventura MSA (Ventura County)
Each bar runs from the lowest-paid tenth to the highest-paid tenth. The darker middle is where half the people are, and the line is the median.
| Area | The lowest-paid tenth earn under | Half earn under | The highest-paid tenth earn over |
|---|---|---|---|
| Oxnard-Thousand Oaks-Ventura MSA (Ventura County) | $47,760 | $64,214 | $132,094 |
| Across California | $48,694 | $78,665 | $135,771 |
The federal Bureau of Labor Statistics' 2026 figures for Oxnard-Thousand Oaks-Ventura MSA (Ventura County) beside the same figures for the whole state. A region can sit well below or above the statewide spread, and the statewide number is the one most often quoted — so where they differ, the local row is the one that describes the work near this program.
- Typical pay in California
- $78,665per yearOxnard-Thousand Oaks-Ventura MSA: $62,752
- Projected openings
- 7,970Oxnard-Thousand Oaks-Ventura MSA: 170
- Projected change
- +5.5%
- Usually needs
- High school diploma or equivalent
Getting in
- Experience needed first
- None
- Training after you are hired
- An apprenticeship
People usually enter this job through an apprenticeship rather than from a classroom course alone. Ask the provider whether this program leads to one.
These are the federal government's answers for the occupation, not rules this provider sets. California publishes the same two answers for every one of these jobs.
What people in this job actually studied
Most common: High school diploma — 50% of the people doing this work.
California says this job usually needs: High school diploma or equivalent. 13% of the people doing it went less far than that.
- No high school diploma
- 13%
- High school diploma
- 50%
- Started college, no degree
- 23%
- Two-year degree
- 9%
- Four-year degree
- 4%
- Master's degree
- 0.5%
- Doctorate or professional degree
- 0.1%
This counts people already doing this job, across the whole United States. Every other figure on this page is California's, and the federal government publishes no state version of this one. It is what people happen to have, not a rule about who gets hired. A small row does not mean you would be turned away, and a large one is not a promise of a job.
Program details
This program provides in-person instruction only.
Sheet Metal Workers are part of the building and construction trades. In shops, we layout, fabricate and assemble sheet metal products to be installed in buildings and construction projects. The primary work is heating, ventilating and air conditioning. We also fabricate and install metal roofs, kitchen equipment, blowpipe systems, conveyors, chutes and hoppers.
Someone else may be able to pay for this
This program was on California's Eligible Training Provider List when the state last reported it to the U.S. Department of Labor (2026-08-04). Programs on that list can be paid for through an Individual Training Account. Listings are renewed periodically and can lapse, so a program listed when the state last reported may not be listed today. Ask before you rely on it.
The place to ask is an America's Job Center of California
America`s Job Center of California OxnardComprehensive center
Phone: 805-648-WORK (9675)
2901 N. Ventura RoadThird FloorOxnard, CA 93036-1150about 3.2 miles away
Hours: 8:00 a.m. to 5:00 p.m. Monday - Friday
Has a veterans' representative
America`s Job Center of California - Simi ValleyAffiliate site
Phone: 805-648-WORK (9675) or toll-free at 833-810-9675
2900 N. Madera Rd.County of Ventura Human Services Center Suite 100Simi Valley, CA 93065about 24.6 miles away
Hours: Monday through Friday, 8:00a.m. to 5:00p.m.
Distances are straight-line, so the drive is longer. Call before you travel: opening hours here are as the federal directory published them, and the state notes its own staff are not present at every location.
Find a center anywhere in California, and check what is on the list today:
CareerOneStop — American Job Center Finder (U.S. DOL) · California EDD — Office Locator · California EDD — Eligible Training Provider List
How this gets paid for, and what to ask →
Whether a person can have a program paid for is decided by their local workforce development board and the America's Job Center staff who interview them — not by this site, and not by the training provider. California has 45 local workforce development areas and each sets its own policies, so the answer can differ between two people in neighboring counties. Nothing here is a promise of funding or a determination of eligibility.
The rules cited here, and the state and federal sites linked to, are published in English.
How this site gets its figures, and what they do not tell you →