Industrial Maintenance and Automated Technology
Institute of Technology · Clovis, CA
- Cost
- $21,233
- Length
- 40 weeks
- Working 6 months later
- 70%
Program names and program descriptions appear here in English, because that is the only language the federal and state records publish them in. Occupation titles are translated where O*NET publishes a Spanish name. Everything else on this page is translated.
What happened to people who took this
- People enrolled
- 76
- Finished the program
- 80%Based on 40 peopleTypical California program: 85% of 1,951 reportingThat median pools every California program that reported this measure, whatever its length, credential, or field, and leaves out the ones that reported nothing. It is a reference point, not a rating of this program.
- Working 6 months later
- 70%Typical California program: 69% of 1,690 reportingThat median pools every California program that reported this measure, whatever its length, credential, or field, and leaves out the ones that reported nothing. It is a reference point, not a rating of this program.
- Earnings in one quarter after
- $11,604A single quarter of earnings, roughly three months, not a yearly salary. Do not compare it directly with the yearly pay shown for the occupation.Typical California program: $10,900 of 1,339 reportingThat median pools every California program that reported this measure, whatever its length, credential, or field, and leaves out the ones that reported nothing. It is a reference point, not a rating of this program.
The jobs this trains for
This describes the jobs people do, not the classes this program teaches. It comes from the U.S. Department of Labor, which asks people already doing the work. The Department publishes it in English only, so the job names and the sentences below stay in English on this page.
Trains for more than one job. The outlook shown is the weakest of them.
Where California publishes a separate figure for Fresno MSA (Fresno and Madera Counties), it appears beneath the statewide one. Statewide stays the headline: people who train here do not necessarily work here.
Electro-Mechanical and Mechatronics Technologists and Technicians
Job ads may call this: Electro-Mechanic · Process Control Tech · Product Test Specialist · Test Technician (Test Tech)
Some of what people in this job do. The Department rates how important each one is, and they appear in that order.
- Develop, test, or program new robots.
- Test performance of electromechanical assemblies, using test instruments such as oscilloscopes, electronic voltmeters, or bridges.
- Install or program computer hardware or machine or instrumentation software in microprocessor-based systems.
- Read blueprints, schematics, diagrams, or technical orders to determine methods and sequences of assembly.
Show 4 more things this job involves
- Modify, maintain, or repair electrical, electronic, or mechanical components, equipment, or systems to ensure proper functioning.
- Prepare written documentation of electromechanical test results.
- Inspect parts for surface defects.
- Install electrical or electronic parts and hardware in housings or assemblies, using soldering equipment and hand tools.
- Typical pay in California
- $83,833per year
- Projected openings
- 1,700
- Projected change
- +5.3%
- Usually needs
- Associate's degree
California publishes no separate figure for this job in Fresno MSA. The statewide figures above are the only ones there are.
Getting in
- Experience needed first
- None
- Training after you are hired
- None
No earlier job experience is expected, and new hires are not put through a long training period. For work like this, a program is usually the way in.
These are the federal government's answers for the occupation, not rules this provider sets. California publishes the same two answers for every one of these jobs.
Helpers--Electricians
Pay, hiring, and what people studied
Job ads may call this: Apprentice · Electrical Helper · Electrician Helper · Wireman Apprentice
- Strip insulation from wire ends, using wire stripping pliers, and attach wires to terminals for subsequent soldering.
- Trace out short circuits in wiring, using test meter.
- Measure, cut, and bend wire and conduit, using measuring instruments and hand tools.
- Examine electrical units for loose connections and broken insulation and tighten connections, using hand tools.
Show 4 more things this job involves
- Maintain tools, vehicles, and equipment and keep parts and supplies in order.
- Drill holes and pull or push wiring through openings, using hand and power tools.
- Clean work area and wash parts.
- Perform semi-skilled and unskilled laboring duties related to the installation, maintenance and repair of a wide variety of electrical systems and equipment.
What this pays in Fresno MSA (Fresno and Madera Counties)
Each bar runs from the lowest-paid tenth to the highest-paid tenth. The darker middle is where half the people are, and the line is the median.
| Area | The lowest-paid tenth earn under | Half earn under | The highest-paid tenth earn over |
|---|---|---|---|
| Fresno MSA (Fresno and Madera Counties) | $36,801 | $47,390 | $65,795 |
| Across California | $39,666 | $53,491 | $70,520 |
The federal Bureau of Labor Statistics' 2026 figures for Fresno MSA (Fresno and Madera Counties) beside the same figures for the whole state. A region can sit well below or above the statewide spread, and the statewide number is the one most often quoted — so where they differ, the local row is the one that describes the work near this program.
- Typical pay in California
- $53,491per year
- Projected openings
- 3,430
- Projected change
- +3.1%
- Usually needs
- High school diploma or equivalent
California publishes no separate figure for this job in Fresno MSA. The statewide figures above are the only ones there are.
Getting in
- Experience needed first
- None
- Training after you are hired
- Under a month
No earlier job experience is expected, and new hires are not put through a long training period. For work like this, a program is usually the way in.
Electrical and Electronics Repairers, Commercial and Industrial Equipment
Pay, hiring, and what people studied
Job ads may call this: Scale Technician · Repair Technician · Control Technician · Electronic Technician
- Test faulty equipment to diagnose malfunctions, using test equipment or software, and applying knowledge of the functional operation of electronic units and systems.
- Maintain equipment logs that record performance problems, repairs, calibrations, or tests.
- Set up and test industrial equipment to ensure that it functions properly.
- Inspect components of industrial equipment for accurate assembly and installation or for defects, such as loose connections or frayed wires.
Show 4 more things this job involves
- Install repaired equipment in various settings, such as industrial or military establishments.
- Operate equipment to demonstrate proper use or to analyze malfunctions.
- Enter information into computer to copy program or to draw, modify, or store schematics, applying knowledge of software package used.
- Calibrate testing instruments and installed or repaired equipment to prescribed specifications.
What this pays in Fresno MSA (Fresno and Madera Counties)
Each bar runs from the lowest-paid tenth to the highest-paid tenth. The darker middle is where half the people are, and the line is the median.
| Area | The lowest-paid tenth earn under | Half earn under | The highest-paid tenth earn over |
|---|---|---|---|
| Fresno MSA (Fresno and Madera Counties) | $55,033 | $83,095 | $178,755 |
| Across California | $54,283 | $89,542 | $133,583 |
The federal Bureau of Labor Statistics' 2026 figures for Fresno MSA (Fresno and Madera Counties) beside the same figures for the whole state. A region can sit well below or above the statewide spread, and the statewide number is the one most often quoted — so where they differ, the local row is the one that describes the work near this program.
- Typical pay in California
- $89,542per yearFresno MSA: $84,231
- Projected openings
- 5,030Fresno MSA: 120
- Projected change
- +5.1%
- Usually needs
- Postsecondary non-degree award
Getting in
- Experience needed first
- None
- Training after you are hired
- More than a year
New hires are trained on the job for more than a year after they start. The classroom part is the beginning of this work, not the whole of it.
Program details
This is a hybrid or blended program providing both in-person and online instruction.
A program that prepares individuals to apply basic engineering principles and technical skills in support of engineers and other professionals engaged in developing installing calibrating modifying and maintaining automated systems. Includes instruction in computer systems electronics and instrumentation programmable logic controllers PLCs electric hydraulic and pneumatic control systems actuator and sensor systems process control robotics applications to specific industrial tasks and report preparation.
Someone else may be able to pay for this
This program was on California's Eligible Training Provider List when the state last reported it to the U.S. Department of Labor (2026-09-18). Programs on that list can be paid for through an Individual Training Account. Listings are renewed periodically and can lapse, so a program listed when the state last reported may not be listed today. Ask before you rely on it.
Ask before you enroll, not after
The order the rules set out starts at the center rather than at the school. Before a center can find somebody eligible for training services it has to gather enough to decide, at a minimum through an interview, evaluation or assessment and career planning. Referring a person to the provider they have chosen and setting up the account both come after that, and both are the center's to do — the account is a payment agreement with the training provider, and it is the provider that is paid through it. So the call belongs before enrolling and before paying. Anyone who has already done either should still ask, and ask what it means for them.
The place to ask is an America's Job Center of California
Fresno East -Workforce ConnectionComprehensive center
Phone: 559-230-4440
1455 E. Shaw AvenueFresno, CA 93710about 2.9 miles away
Hours: Monday -Friday 8:00am-5:00pm
Reverend Swillis Neighborhood Youth Center (NYC)Affiliate site
Phone: 559-264-1048
1805 E. California AvenueReverend Swills Neighborhood Youth CenterFresno, CA 93706about 7.5 miles away
Hours: Monday-Friday 8:30 am - 5:00pm.
RS Fresno Comprehensive - Workforce ConnectionComprehensive center
Phone: 559-230-3600
3170 W. Shaw AvenueSuite 101Fresno, CA 93711about 7.6 miles away
Hours: Monday through Friday 8:00 am - 5:00 pm
Has a veterans' representative
At a comprehensive center all the required partner programs can be reached; an affiliate site offers some of them. Distances are straight-line, so the drive is longer. Call before you travel: opening hours here are as the federal directory published them, and the state notes its own staff are not present at every location.
Find a center anywhere in California, and check what is on the list today:
CareerOneStop — American Job Center Finder (U.S. DOL) · California EDD — Office Locator · California EDD — Eligible Training Provider List
How this gets paid for, and what to ask →
Whether a person can have a program paid for is decided by their local workforce development board and the America's Job Center staff who interview them — not by this site, and not by the training provider. California has 45 local workforce development areas and each sets its own policies, so the answer can differ between two people in neighboring counties. Nothing here is a promise of funding or a determination of eligibility.
The rules cited here, and the state and federal sites linked to, are published in English.
How this site gets its figures, and what they do not tell you →