Machinist
North Valley Occupational Center - LAUSD · Mission Hills, CA
- Cost
- $4,225
- Length
- 27 weeks
- Working 6 months later
- 44%
Program names, program descriptions and occupation titles appear here in English, because that is the only language the federal and state records publish them in. Everything else on this page is translated.
What happened to people who took this
- People enrolled
- 289
- Finished the program
- 56%Based on 298 peopleTypical California program: 85% of 1,951 reportingThat median pools every California program that reported this measure, whatever its length, credential, or field, and leaves out the ones that reported nothing. It is a reference point, not a rating of this program.
- Working 6 months later
- 44%Typical California program: 69% of 1,690 reportingThat median pools every California program that reported this measure, whatever its length, credential, or field, and leaves out the ones that reported nothing. It is a reference point, not a rating of this program.
- Earnings in one quarter after
- $12,251A single quarter of earnings, roughly three months, not a yearly salary. Do not compare it directly with the yearly pay shown for the occupation.Typical California program: $10,900 of 1,339 reportingThat median pools every California program that reported this measure, whatever its length, credential, or field, and leaves out the ones that reported nothing. It is a reference point, not a rating of this program.
The job this trains for
This describes the jobs people do, not the classes this program teaches. It comes from the U.S. Department of Labor, which asks people already doing the work. The Department publishes it in English only, so the job names and the sentences below stay in English on this page.
Shrinking -1.6%
California projects this job will shrink over the next ten years. Fewer openings may mean a harder search.
Related work California expects more of
The U.S. Department of Labor lists these as related to the job above, and California projects growth in them rather than decline. Related is not the same as interchangeable: the training, the licences and the pay can all differ, and this program does not train for these. It is a place to start asking, not a recommendation.
- Computer Numerically Controlled Tool Programmers$83,963 · +10% · 15 programs here
No regional figures for this program's city
Mission Hills is not one of the metropolitan or rural areas California names when it publishes wages and openings. A neighbouring area's figures would look exactly like a correct answer, so none are shown and the statewide figures stand alone. About half of California's programs are in this position.
Machinists
Job ads may call this: Machinist · Gear Machinist · Tool Room Machinist · Production Machinist
Some of what people in this job do. The Department rates how important each one is, and they appear in that order.
- Calculate dimensions or tolerances, using instruments, such as micrometers or vernier calipers.
- Machine parts to specifications, using machine tools, such as lathes, milling machines, shapers, or grinders.
- Measure, examine, or test completed units to check for defects and ensure conformance to specifications, using precision instruments, such as micrometers.
- Set up, adjust, or operate basic or specialized machine tools used to perform precision machining operations.
Show 2 more things this job involves
- Program computers or electronic instruments, such as numerically controlled machine tools.
- Study sample parts, blueprints, drawings, or engineering information to determine methods or sequences of operations needed to fabricate products.
- Typical pay in California
- $58,495per year
- Projected openings
- 18,420
- Projected change
- -1.6%
- Usually needs
- High school diploma or equivalent
Getting in
- Experience needed first
- None
- Training after you are hired
- More than a year
New hires are trained on the job for more than a year after they start. The classroom part is the beginning of this work, not the whole of it.
These are the federal government's answers for the occupation, not rules this provider sets. California publishes the same two answers for every one of these jobs.
What people in this job actually studied
Most common: High school diploma — 45% of the people doing this work.
California says this job usually needs: High school diploma or equivalent. 9% of the people doing it went less far than that.
- No high school diploma
- 9%
- High school diploma
- 45%
- Started college, no degree
- 27%
- Two-year degree
- 13%
- Four-year degree
- 4%
- Master's degree
- 0.4%
- Doctorate or professional degree
- 0.2%
This counts people already doing this job, across the whole United States. Every other figure on this page is California's, and the federal government publishes no state version of this one. It is what people happen to have, not a rule about who gets hired. A small row does not mean you would be turned away, and a large one is not a promise of a job.
Program details
This program provides in-person instruction only.
Program is designed to provide students with real time manufacturing experience. Modern industrial equipment is utilized. Machine set-up, operation and programming are covered. Students participate in the design, manufacturing and verification of products from typical manufacturing materials.
http://www.laadulted.com
We could not reach this page when we checked on 2026-08-04.
Someone else may be able to pay for this
This program was on California's Eligible Training Provider List when the state last reported it to the U.S. Department of Labor (2026-08-04). Programs on that list can be paid for through an Individual Training Account. Listings are renewed periodically and can lapse, so a program listed when the state last reported may not be listed today. Ask before you rely on it.
The place to ask is an America's Job Center of California
Northeast San Fernando Valley AJCCAffiliate site
Phone: 818-482-1754
13356 Eldrige AvenueGoodwill Industries of Southern CaliforniaSylmar, CA 91342about 2.7 miles away
Hours: Monday - Friday 8 a.m.-5 p.m.
El Proyecto WorkSource-OneStop, Sun ValleyComprehensive center
Phone: 818-504-0334
9024 Laurel Canyon BlvdEl Proyecto WorkSource CenterSun Valley, CA 91352about 3.6 miles away
Hours: Monday - Friday 8 a.m.-5 p.m., Evening, Saturday by appointment
Has a veterans' representative
Job ConnectAffiliate site
Phone: 818-238-5580
110 N. Glenoaks BoulevardBurbank Central LibraryBurbank, CA 91502about 10.1 miles away
Hours: Monday -Thursday 10a.m.-9:00p.m Friday-Saturday 10:00a.m.-6:00p.m.
Distances are straight-line, so the drive is longer. Call before you travel: opening hours here are as the federal directory published them, and the state notes its own staff are not present at every location.
Find a center anywhere in California, and check what is on the list today:
CareerOneStop — American Job Center Finder (U.S. DOL) · California EDD — Office Locator · California EDD — Eligible Training Provider List
How this gets paid for, and what to ask →
Whether a person can have a program paid for is decided by their local workforce development board and the America's Job Center staff who interview them — not by this site, and not by the training provider. California has 45 local workforce development areas and each sets its own policies, so the answer can differ between two people in neighboring counties. Nothing here is a promise of funding or a determination of eligibility.
The rules cited here, and the state and federal sites linked to, are published in English.
How this site gets its figures, and what they do not tell you →