Machine and Metals Technology, Certificate of Achievement
College of Marin · Greenbrae, CA
- Cost
- $2,197
- Length
- 34 weeks
- Working 6 months later
- Not reported
Program names, program descriptions and occupation titles appear here in English, because that is the only language the federal and state records publish them in. Everything else on this page is translated.
What happened to people who took this
- People enrolled
- 97
- Finished the program
- 83%Based on 86 peopleTypical California program: 85% of 1,951 reportingThat median pools every California program that reported this measure, whatever its length, credential, or field, and leaves out the ones that reported nothing. It is a reference point, not a rating of this program.
- Working 6 months later
- Not reported
- Earnings in one quarter after
- Not reported
The jobs this trains for
This describes the jobs people do, not the classes this program teaches. It comes from the U.S. Department of Labor, which asks people already doing the work. The Department publishes it in English only, so the job names and the sentences below stay in English on this page.
Shrinking -20%
California projects this job will shrink over the next ten years. Fewer openings may mean a harder search.
Trains for more than one job. The outlook shown is the weakest of them.
Related work California expects more of
The U.S. Department of Labor lists these as related to the job above, and California projects growth in them rather than decline. Related is not the same as interchangeable: the training, the licences and the pay can all differ, and this program does not train for these. It is a place to start asking, not a recommendation.
- Welders, Cutters, Solderers, and Brazers$59,385 · +3.2% · 93 programs here
- Sheet Metal Workers$78,665 · +5.5% · 13 programs here
- Structural Iron and Steel Workers$78,439 · +5.5% · 7 programs here
No regional figures for this program's city
Greenbrae is not one of the metropolitan or rural areas California names when it publishes wages and openings. A neighbouring area's figures would look exactly like a correct answer, so none are shown and the statewide figures stand alone. About half of California's programs are in this position.
Structural Metal Fabricators and Fitters
Job ads may call this: Fitter · Fabricator · Layout Man · Ship Fitter
Some of what people in this job do. The Department rates how important each one is, and they appear in that order.
- Verify conformance of workpieces to specifications, using squares, rulers, and measuring tapes.
- Study engineering drawings and blueprints to determine materials requirements and task sequences.
- Position, align, fit, and weld parts to form complete units or subunits, following blueprints and layout specifications, and using jigs, welding torches, and hand tools.
- Lay out and examine metal stock or workpieces to be processed to ensure that specifications are met.
- Tack-weld fitted parts together.
- Typical pay in California
- $58,904per year
- Projected openings
- 2,460
- Projected change
- -20%
- Usually needs
- High school diploma or equivalent
Getting in
- Experience needed first
- None
- Training after you are hired
- 1 to 12 months
These are the federal government's answers for the occupation, not rules this provider sets. California publishes the same two answers for every one of these jobs.
What people in this job actually studied
Most common: High school diploma — 47% of the people doing this work.
California says this job usually needs: High school diploma or equivalent. 16% of the people doing it went less far than that.
- No high school diploma
- 16%
- High school diploma
- 47%
- Started college, no degree
- 19%
- Two-year degree
- 10%
- Four-year degree
- 7%
- Master's degree
- 1%
- Doctorate or professional degree
- 0%
This counts people already doing this job, across the whole United States. Every other figure on this page is California's, and the federal government publishes no state version of this one. It is what people happen to have, not a rule about who gets hired. A small row does not mean you would be turned away, and a large one is not a promise of a job.
Computer Numerically Controlled Tool Operators
Pay, hiring, and what people studied
Job ads may call this: Machine Operator · Machine Set Up Operator · CNC Operator (Computer Numerical Control Operator) · CNC Machinist (Computer Numerical Control Machinist)
- Measure dimensions of finished workpieces to ensure conformance to specifications, using precision measuring instruments, templates, and fixtures.
- Set up and operate computer-controlled machines or robots to perform one or more machine functions on metal or plastic workpieces.
- Mount, install, align, and secure tools, attachments, fixtures, and workpieces on machines, using hand tools and precision measuring instruments.
- Review program specifications or blueprints to determine and set machine operations and sequencing, finished workpiece dimensions, or numerical control sequences.
Show 2 more things this job involves
- Stop machines to remove finished workpieces or to change tooling, setup, or workpiece placement, according to required machining sequences.
- Listen to machines during operation to detect sounds such as those made by dull cutting tools or excessive vibration, and adjust machines to compensate for problems.
- Typical pay in California
- $57,799per year
- Projected openings
- 16,320
- Projected change
- -11.5%
- Usually needs
- High school diploma or equivalent
Getting in
- Experience needed first
- None
- Training after you are hired
- 1 to 12 months
What people in this job actually studied
Most common: High school diploma — 41% of the people doing this work.
California says this job usually needs: High school diploma or equivalent. 10% of the people doing it went less far than that.
- No high school diploma
- 10%
- High school diploma
- 41%
- Started college, no degree
- 26%
- Two-year degree
- 12%
- Four-year degree
- 9%
- Master's degree
- 0.9%
- Doctorate or professional degree
- 0.7%
Computer Numerically Controlled Tool Programmers
Pay, hiring, and what people studied
Job ads may call this: Programmer · Numerical Control Programmer (NC Programmer) · CNC Tech (Computer Numerical Control Technician) · CAD Programmer (Computer-Aided Design Programmer)
- Determine the sequence of machine operations, and select the proper cutting tools needed to machine workpieces into the desired shapes.
- Analyze job orders, drawings, blueprints, specifications, printed circuit board pattern films, and design data to calculate dimensions, tool selection, machine speeds, and feed rates.
- Observe machines on trial runs or conduct computer simulations to ensure that programs and machinery will function properly and produce items that meet specifications.
- Write programs in the language of a machine's controller and store programs on media, such as punch tapes, magnetic tapes, or disks.
Show 2 more things this job involves
- Determine reference points, machine cutting paths, or hole locations, and compute angular and linear dimensions, radii, and curvatures.
- Enter computer commands to store or retrieve parts patterns, graphic displays, or programs that transfer data to other media.
- Typical pay in California
- $83,963per year
- Projected openings
- 3,190
- Projected change
- +10%
- Usually needs
- Postsecondary non-degree award
Getting in
- Experience needed first
- None
- Training after you are hired
- 1 to 12 months
What people in this job actually studied
Most common: High school diploma — 41% of the people doing this work.
California says this job usually needs: Postsecondary non-degree award. That is not one of the steps below, so there is no way to count how many people meet it.
- No high school diploma
- 10%
- High school diploma
- 41%
- Started college, no degree
- 26%
- Two-year degree
- 12%
- Four-year degree
- 9%
- Master's degree
- 0.9%
- Doctorate or professional degree
- 0.7%
It is also measured on a different scale from “Usually needs” above, so the two cannot be subtracted from one another.
Program details
This program provides in-person instruction only.
Machine and metals technology is designed as preparation for entrance into metalworking occupations. Graduates may enter the fields dealing with industrial production, prototype construction, special die work, or research and development. The courses in welding are designed to provide opportunity for the development of skills, knowledge, and experience for employment in the occupation and as auxiliary experience for persons in other majors.
Someone else may be able to pay for this
This program was on California's Eligible Training Provider List when the state last reported it to the U.S. Department of Labor (2026-08-04). Programs on that list can be paid for through an Individual Training Account. Listings are renewed periodically and can lapse, so a program listed when the state last reported may not be listed today. Ask before you rely on it.
The place to ask is an America's Job Center of California
CareerPoint MarinAffiliate site
Phone: 415-966-0860
1800 Ignacio Blvd.Building 27 (Upstairs)Novato, CA 94949about 9.4 miles away
Hours: 8am-12pm and 1pm - 5pm
Has a veterans' representative
RichmondWORKSComprehensive center
Phone: 510-307-8014
330 25th StreetEmployment and Training DepartmentRichmond, CA 94804about 11.7 miles away
Hours: Monday - Friday, 9:00 am to 4:30 pm.
Chinatown Centralized Job CenterAffiliate site
Phone: 415-677-7500
601 Jackson StreetGround FloorSan Francisco, CA 94133about 13 miles away
Hours: Monday - Friday 9 a.m. - 5 p.m.
Distances are straight-line, so the drive is longer. Call before you travel: opening hours here are as the federal directory published them, and the state notes its own staff are not present at every location.
Find a center anywhere in California, and check what is on the list today:
CareerOneStop — American Job Center Finder (U.S. DOL) · California EDD — Office Locator · California EDD — Eligible Training Provider List
How this gets paid for, and what to ask →
Whether a person can have a program paid for is decided by their local workforce development board and the America's Job Center staff who interview them — not by this site, and not by the training provider. California has 45 local workforce development areas and each sets its own policies, so the answer can differ between two people in neighboring counties. Nothing here is a promise of funding or a determination of eligibility.
The rules cited here, and the state and federal sites linked to, are published in English.
How this site gets its figures, and what they do not tell you →