Entry Level CNC (Computer Numerical Control)-NIMS Certified
College of the Canyons · Santa Clarita, CA
- Cost
- $8,800
- Length
- 8 weeks
- Working 6 months later
- Not reported
Program names and program descriptions appear here in English, because that is the only language the federal and state records publish them in. Occupation titles are translated where O*NET publishes a Spanish name. Everything else on this page is translated.
What happened to people who took this
No outcomes reported for this program
About a third of California programs report nothing. That is a fact about the program's reporting, not evidence that it works or does not.
The jobs this trains for
This describes the jobs people do, not the classes this program teaches. It comes from the U.S. Department of Labor, which asks people already doing the work. The Department publishes it in English only, so the job names and the sentences below stay in English on this page.
Shrinking -9.1%
California projects this job will shrink over the next ten years. Fewer openings may mean a harder search.
Trains for more than one job. The outlook shown is the weakest of them.
Where California publishes a separate figure for Los Angeles-Long Beach-Glendale MD (Los Angeles County), it appears beneath the statewide one. Statewide stays the headline: people who train here do not necessarily work here.
Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic
Job ads may call this: Setup Operator · Metal Inspector · Wire Mill Rover · Machine Operator
Some of what people in this job do. The Department rates how important each one is, and they appear in that order.
- Measure and examine extruded products to locate defects and to check for conformance to specifications, adjusting controls as necessary to alter products.
- Determine setup procedures and select machine dies and parts, according to specifications.
- Start machines and set controls to regulate vacuum, air pressure, sizing rings, and temperature, and to synchronize speed of extrusion.
- Reel extruded products into rolls of specified lengths and weights.
Show 4 more things this job involves
- Install dies, machine screws, and sizing rings on machines that extrude thermoplastic or metal materials.
- Change dies on extruding machines, according to production line changes.
- Clean work areas.
- Weigh and mix pelletized, granular, or powdered thermoplastic materials and coloring pigments.
What this pays in Los Angeles-Long Beach-Glendale MD (Los Angeles County)
Each bar runs from the lowest-paid tenth to the highest-paid tenth. The darker middle is where half the people are, and the line is the median.
| Area | The lowest-paid tenth earn under | Half earn under | The highest-paid tenth earn over |
|---|---|---|---|
| Los Angeles-Long Beach-Glendale MD (Los Angeles County) | $38,074 | $46,859 | $58,647 |
| Across California | $38,080 | $46,927 | $62,157 |
The federal Bureau of Labor Statistics' 2026 figures for Los Angeles-Long Beach-Glendale MD (Los Angeles County) beside the same figures for the whole state. A region can sit well below or above the statewide spread, and the statewide number is the one most often quoted — so where they differ, the local row is the one that describes the work near this program.
- Typical pay in California
- $46,927per yearLos Angeles-Long Beach-Glendale MD: $46,200
- Projected openings
- 3,620Los Angeles-Long Beach-Glendale MD: 1,150
- Projected change
- -5%
- Usually needs
- High school diploma or equivalent
Getting in
- Experience needed first
- None
- Training after you are hired
- 1 to 12 months
These are the federal government's answers for the occupation, not rules this provider sets. California publishes the same two answers for every one of these jobs.
Rolling Machine Setters, Operators, and Tenders, Metal and Plastic
Pay, hiring, and what people studied
Job ads may call this: Mill Operator · Machine Operator · Calender Operator · Cold Mill Operator
- Monitor machine cycles and mill operation to detect jamming and to ensure that products conform to specifications.
- Adjust and correct machine set-ups to reduce thicknesses, reshape products, and eliminate product defects.
- Start operation of rolling and milling machines to flatten, temper, form, and reduce sheet metal sections and to produce steel strips.
- Examine, inspect, and measure raw materials and finished products to verify conformance to specifications.
Show 4 more things this job involves
- Read rolling orders, blueprints, and mill schedules to determine setup specifications, work sequences, product dimensions, and installation procedures.
- Thread or feed sheets or rods through rolling mechanisms, or start and control mechanisms that automatically feed steel into rollers.
- Manipulate controls and observe dial indicators to monitor, adjust, and regulate speeds of machine mechanisms.
- Set distance points between rolls, guides, meters, and stops, according to specifications.
What this pays in Los Angeles-Long Beach-Glendale MD (Los Angeles County)
Each bar runs from the lowest-paid tenth to the highest-paid tenth. The darker middle is where half the people are, and the line is the median.
| Area | The lowest-paid tenth earn under | Half earn under | The highest-paid tenth earn over |
|---|---|---|---|
| Los Angeles-Long Beach-Glendale MD (Los Angeles County) | $38,545 | $48,380 | $77,297 |
| Across California | $38,550 | $49,136 | $77,294 |
The federal Bureau of Labor Statistics' 2026 figures for Los Angeles-Long Beach-Glendale MD (Los Angeles County) beside the same figures for the whole state. A region can sit well below or above the statewide spread, and the statewide number is the one most often quoted — so where they differ, the local row is the one that describes the work near this program.
- Typical pay in California
- $49,136per yearLos Angeles-Long Beach-Glendale MD: $47,018
- Projected openings
- 930Los Angeles-Long Beach-Glendale MD: 320
- Projected change
- -9.1%
- Usually needs
- High school diploma or equivalent
Getting in
- Experience needed first
- None
- Training after you are hired
- 1 to 12 months
Program details
This program provides in-person instruction only.
For qualified candidates this intensive job training program provides avenues of opportunity in the field of CNC machining. Leading companies in the greater Los Angeles region have a need for skilled, trained welders to fabricate parts and assemblies for a wide variety of industries (aerospace, automotive, etc.). The program will teach participants important skills in quality, documentation, and record keeping in manufacturing environment. Participants will learn to read and interpret blueprint/ product drawings, including the use of tolerances in measurement. Additionally, participants will learn applied math operations in order to set-up and verify machining operations. Participants will learn how to be safe in an industrial environment and how to ensure product flow while maintaining product quality. Program includes the National Institute for Metalworking Skills (NIMS) Measurement, Materials & Safety - Standard Machining Level I (entry level) Certification, which is a performance-based assessment and examination.
Someone else may be able to pay for this
This program was on California's Eligible Training Provider List when the state last reported it to the U.S. Department of Labor (2026-09-18). Programs on that list can be paid for through an Individual Training Account. Listings are renewed periodically and can lapse, so a program listed when the state last reported may not be listed today. Ask before you rely on it.
Ask before you enroll, not after
The order the rules set out starts at the center rather than at the school. Before a center can find somebody eligible for training services it has to gather enough to decide, at a minimum through an interview, evaluation or assessment and career planning. Referring a person to the provider they have chosen and setting up the account both come after that, and both are the center's to do — the account is a payment agreement with the training provider, and it is the provider that is paid through it. So the call belongs before enrolling and before paying. Anyone who has already done either should still ask, and ask what it means for them.
The place to ask is an America's Job Center of California
Santa Clarita AJCCAffiliate site
Phone: 661-298-0152 ext 31
20730 Soledad StreetUnit LSanta Clarita, CA 91351about 3.6 miles away
Hours: Monday - Friday 8:00 am-5pm
Has a veterans' representative
Northeast San Fernando Valley AJCCAffiliate site
Phone: 818-482-1754
13356 Eldrige AvenueGoodwill Industries of Southern CaliforniaSylmar, CA 91342about 9.9 miles away
Hours: Monday - Friday 8 a.m.-5 p.m.
El Proyecto WorkSource-OneStop, Sun ValleyComprehensive center
Phone: 818-504-0334
9024 Laurel Canyon BlvdEl Proyecto WorkSource CenterSun Valley, CA 91352about 15.1 miles away
Hours: Monday - Friday 8 a.m.-5 p.m., Evening, Saturday by appointment
Has a veterans' representative
At a comprehensive center all the required partner programs can be reached; an affiliate site offers some of them. Distances are straight-line, so the drive is longer. Call before you travel: opening hours here are as the federal directory published them, and the state notes its own staff are not present at every location.
Find a center anywhere in California, and check what is on the list today:
CareerOneStop — American Job Center Finder (U.S. DOL) · California EDD — Office Locator · California EDD — Eligible Training Provider List
How this gets paid for, and what to ask →
Whether a person can have a program paid for is decided by their local workforce development board and the America's Job Center staff who interview them — not by this site, and not by the training provider. California has 45 local workforce development areas and each sets its own policies, so the answer can differ between two people in neighboring counties. Nothing here is a promise of funding or a determination of eligibility.
The rules cited here, and the state and federal sites linked to, are published in English.
How this site gets its figures, and what they do not tell you →