Industrial Maintenance Technology Certificate of Achievement
Laney College · Oakland, CA
- Cost
- $2,059
- Length
- 30 weeks
- Working 6 months later
- Not reported
Program names, program descriptions and occupation titles appear here in English, because that is the only language the federal and state records publish them in. Everything else on this page is translated.
What happened to people who took this
No outcomes reported for this program
About a third of California programs report nothing. That is a fact about the program's reporting, not evidence that it works or does not.
The jobs this trains for
This describes the jobs people do, not the classes this program teaches. It comes from the U.S. Department of Labor, which asks people already doing the work. The Department publishes it in English only, so the job names and the sentences below stay in English on this page.
Shrinking -11.5%
California projects this job will shrink over the next ten years. Fewer openings may mean a harder search.
Trains for more than one job. The outlook shown is the weakest of them.
Related work California expects more of
The U.S. Department of Labor lists these as related to the job above, and California projects growth in them rather than decline. Related is not the same as interchangeable: the training, the licences and the pay can all differ, and this program does not train for these. It is a place to start asking, not a recommendation.
- Computer Numerically Controlled Tool Programmers$83,963 · +10% · 15 programs here
Where California publishes a separate figure for Oakland-Fremont-Berkeley MD (Alameda and Contra Costa Counties), it appears beneath the statewide one. Statewide stays the headline: people who train here do not necessarily work here.
Industrial Machinery Mechanics
Job ads may call this: Mechanic · Loom Fixer · Overhauler · Loom Technician
Some of what people in this job do. The Department rates how important each one is, and they appear in that order.
- Repair or maintain the operating condition of industrial production or processing machinery or equipment.
- Repair or replace broken or malfunctioning components of machinery or equipment.
- Clean, lubricate, or adjust parts, equipment, or machinery.
- Disassemble machinery or equipment to remove parts and make repairs.
- Reassemble equipment after completion of inspections, testing, or repairs.
What this pays in Oakland-Fremont-Berkeley MD (Alameda and Contra Costa Counties)
Each bar runs from the lowest-paid tenth to the highest-paid tenth. The darker middle is where half the people are, and the line is the median.
| Area | The lowest-paid tenth earn under | Half earn under | The highest-paid tenth earn over |
|---|---|---|---|
| Oakland-Fremont-Berkeley MD (Alameda and Contra Costa Counties) | $60,488 | $95,140 | $135,358 |
| Across California | $49,234 | $76,504 | $110,745 |
The federal Bureau of Labor Statistics' 2026 figures for Oakland-Fremont-Berkeley MD (Alameda and Contra Costa Counties) beside the same figures for the whole state. A region can sit well below or above the statewide spread, and the statewide number is the one most often quoted — so where they differ, the local row is the one that describes the work near this program.
- Typical pay in California
- $76,504per yearOakland-Fremont-Berkeley MD: $92,486
- Projected openings
- 28,510Oakland-Fremont-Berkeley MD: 2,030
- Projected change
- +13.8%
- Usually needs
- High school diploma or equivalent
Getting in
- Experience needed first
- None
- Training after you are hired
- More than a year
New hires are trained on the job for more than a year after they start. The classroom part is the beginning of this work, not the whole of it.
These are the federal government's answers for the occupation, not rules this provider sets. California publishes the same two answers for every one of these jobs.
What people in this job actually studied
Most common: High school diploma — 40% of the people doing this work.
California says this job usually needs: High school diploma or equivalent. 9% of the people doing it went less far than that.
- No high school diploma
- 9%
- High school diploma
- 40%
- Started college, no degree
- 26%
- Two-year degree
- 18%
- Four-year degree
- 6%
- Master's degree
- 1%
- Doctorate or professional degree
- 0.2%
This counts people already doing this job, across the whole United States. Every other figure on this page is California's, and the federal government publishes no state version of this one. It is what people happen to have, not a rule about who gets hired. A small row does not mean you would be turned away, and a large one is not a promise of a job.
Maintenance Workers, Machinery
Pay, hiring, and what people studied
Job ads may call this: Oiler · Lubricator · Maintainer · Overhauler
- Dismantle machines and remove parts for repair, using hand tools, chain falls, jacks, cranes, or hoists.
- Reassemble machines after the completion of repair or maintenance work.
- Record production, repair, and machine maintenance information.
- Lubricate or apply adhesives or other materials to machines, machine parts, or other equipment according to specified procedures.
Show 4 more things this job involves
- Install, replace, or change machine parts and attachments, according to production specifications.
- Set up and operate machines, and adjust controls to regulate operations.
- Collaborate with other workers to repair or move machines, machine parts, or equipment.
- Read work orders and specifications to determine machines and equipment requiring repair or maintenance.
What this pays in Oakland-Fremont-Berkeley MD (Alameda and Contra Costa Counties)
Each bar runs from the lowest-paid tenth to the highest-paid tenth. The darker middle is where half the people are, and the line is the median.
| Area | The lowest-paid tenth earn under | Half earn under | The highest-paid tenth earn over |
|---|---|---|---|
| Oakland-Fremont-Berkeley MD (Alameda and Contra Costa Counties) | $48,401 | $81,734 | $108,111 |
| Across California | $47,301 | $69,758 | $96,082 |
The federal Bureau of Labor Statistics' 2026 figures for Oakland-Fremont-Berkeley MD (Alameda and Contra Costa Counties) beside the same figures for the whole state. A region can sit well below or above the statewide spread, and the statewide number is the one most often quoted — so where they differ, the local row is the one that describes the work near this program.
- Typical pay in California
- $69,758per yearOakland-Fremont-Berkeley MD: $76,081
- Projected openings
- 3,750Oakland-Fremont-Berkeley MD: 200
- Projected change
- 0%
- Usually needs
- High school diploma or equivalent
Getting in
- Experience needed first
- None
- Training after you are hired
- More than a year
New hires are trained on the job for more than a year after they start. The classroom part is the beginning of this work, not the whole of it.
What people in this job actually studied
Most common: High school diploma — 51% of the people doing this work.
California says this job usually needs: High school diploma or equivalent. 7% of the people doing it went less far than that.
- No high school diploma
- 7%
- High school diploma
- 51%
- Started college, no degree
- 24%
- Two-year degree
- 13%
- Four-year degree
- 4%
- Master's degree
- 0.2%
- Doctorate or professional degree
- 0%
Computer Numerically Controlled Tool Operators
Pay, hiring, and what people studied
Job ads may call this: Machine Operator · Machine Set Up Operator · CNC Operator (Computer Numerical Control Operator) · CNC Machinist (Computer Numerical Control Machinist)
- Measure dimensions of finished workpieces to ensure conformance to specifications, using precision measuring instruments, templates, and fixtures.
- Set up and operate computer-controlled machines or robots to perform one or more machine functions on metal or plastic workpieces.
- Mount, install, align, and secure tools, attachments, fixtures, and workpieces on machines, using hand tools and precision measuring instruments.
- Review program specifications or blueprints to determine and set machine operations and sequencing, finished workpiece dimensions, or numerical control sequences.
Show 2 more things this job involves
- Stop machines to remove finished workpieces or to change tooling, setup, or workpiece placement, according to required machining sequences.
- Listen to machines during operation to detect sounds such as those made by dull cutting tools or excessive vibration, and adjust machines to compensate for problems.
What this pays in Oakland-Fremont-Berkeley MD (Alameda and Contra Costa Counties)
Each bar runs from the lowest-paid tenth to the highest-paid tenth. The darker middle is where half the people are, and the line is the median.
| Area | The lowest-paid tenth earn under | Half earn under | The highest-paid tenth earn over |
|---|---|---|---|
| Oakland-Fremont-Berkeley MD (Alameda and Contra Costa Counties) | $46,383 | $60,969 | $85,263 |
| Across California | $40,575 | $57,799 | $78,593 |
The federal Bureau of Labor Statistics' 2026 figures for Oakland-Fremont-Berkeley MD (Alameda and Contra Costa Counties) beside the same figures for the whole state. A region can sit well below or above the statewide spread, and the statewide number is the one most often quoted — so where they differ, the local row is the one that describes the work near this program.
- Typical pay in California
- $57,799per yearOakland-Fremont-Berkeley MD: $62,966
- Projected openings
- 16,320Oakland-Fremont-Berkeley MD: 760
- Projected change
- -11.5%
- Usually needs
- High school diploma or equivalent
Getting in
- Experience needed first
- None
- Training after you are hired
- 1 to 12 months
What people in this job actually studied
Most common: High school diploma — 41% of the people doing this work.
California says this job usually needs: High school diploma or equivalent. 10% of the people doing it went less far than that.
- No high school diploma
- 10%
- High school diploma
- 41%
- Started college, no degree
- 26%
- Two-year degree
- 12%
- Four-year degree
- 9%
- Master's degree
- 0.9%
- Doctorate or professional degree
- 0.7%
Program details
This program provides in-person instruction only.
A program that prepares individuals to apply technical knowledge and skills to operate computer numerically controlled CNC machine tools such as lathes mills precision measuring tools and related attachments and accessories to perform machining functions such as cutting drilling shaping and finishing products and component parts. Includes instruction in CNC terminology setup programming operations and troubleshooting blueprint reading machining lathe and mill operations technical mathematics computer literacy CAD CAM systems shop and safety practices equipment capabilities and regulations and laws.
We could not reach the page in the federal record when we checked on 2026-08-04, so this links to the provider's home page instead.
Someone else may be able to pay for this
This program was on California's Eligible Training Provider List when the state last reported it to the U.S. Department of Labor (2026-08-04). Programs on that list can be paid for through an Individual Training Account. Listings are renewed periodically and can lapse, so a program listed when the state last reported may not be listed today. Ask before you rely on it.
The place to ask is an America's Job Center of California
West Oakland Neighborhood Career CenterAffiliate site
Phone: 510-419-0392
1801 Adeline StreetThe West Oakland Public Library Suite 209Oakland, CA 94607about 0.8 miles away
Hours: Mon - Fri: 9:00AM- 5:00PM Resource Room/Computer Access closes at 4:30pm
America`s Job Center of California-Downtown Oakland Career CenterComprehensive center
Phone: 510-858-6742
1000 Broadway, Suite 625Trans Pacific CentreOakland, CA 94607about 1.6 miles away
Hours: Monday - Friday, 9 a.m.-5 p.m. Resource Room/Computer Access Closes at 4:30 p.m. Call ahead at 510-858-6742 to reserve a spot in the resource /Computer Access.
Alameda One Stop Career CenterAffiliate site
Phone: 510-748-2208
555 Ralph Appezzato Memorial ParkwayAlameda College, Portable PAlameda, CA 94501about 2.3 miles away
Hours: Mon/Tues/Thurs 9:30am-4:30pm Wed/Fri 9:30am-12:30pm
Distances are straight-line, so the drive is longer. Call before you travel: opening hours here are as the federal directory published them, and the state notes its own staff are not present at every location.
Find a center anywhere in California, and check what is on the list today:
CareerOneStop — American Job Center Finder (U.S. DOL) · California EDD — Office Locator · California EDD — Eligible Training Provider List
How this gets paid for, and what to ask →
Whether a person can have a program paid for is decided by their local workforce development board and the America's Job Center staff who interview them — not by this site, and not by the training provider. California has 45 local workforce development areas and each sets its own policies, so the answer can differ between two people in neighboring counties. Nothing here is a promise of funding or a determination of eligibility.
The rules cited here, and the state and federal sites linked to, are published in English.
How this site gets its figures, and what they do not tell you →