Manufacturing - Machinist
Reedley Community College · Reedley, CA
- Cost
- $2,850
- Length
- 36 weeks
- Working 6 months later
- 92%
Program names, program descriptions and occupation titles appear here in English, because that is the only language the federal and state records publish them in. Everything else on this page is translated.
What happened to people who took this
- People enrolled
- 88
- Finished the program
- 100%Based on 60 peopleTypical California program: 85% of 1,951 reportingThat median pools every California program that reported this measure, whatever its length, credential, or field, and leaves out the ones that reported nothing. It is a reference point, not a rating of this program.
- Working 6 months later
- 92%Typical California program: 69% of 1,690 reportingThat median pools every California program that reported this measure, whatever its length, credential, or field, and leaves out the ones that reported nothing. It is a reference point, not a rating of this program.
- Earnings in one quarter after
- $9,210A single quarter of earnings, roughly three months, not a yearly salary. Do not compare it directly with the yearly pay shown for the occupation.Typical California program: $10,900 of 1,339 reportingThat median pools every California program that reported this measure, whatever its length, credential, or field, and leaves out the ones that reported nothing. It is a reference point, not a rating of this program.
The jobs this trains for
This describes the jobs people do, not the classes this program teaches. It comes from the U.S. Department of Labor, which asks people already doing the work. The Department publishes it in English only, so the job names and the sentences below stay in English on this page.
Shrinking -11.5%
California projects this job will shrink over the next ten years. Fewer openings may mean a harder search.
Trains for more than one job. The outlook shown is the weakest of them.
Related work California expects more of
The U.S. Department of Labor lists these as related to the job above, and California projects growth in them rather than decline. Related is not the same as interchangeable: the training, the licences and the pay can all differ, and this program does not train for these. It is a place to start asking, not a recommendation.
- Computer Numerically Controlled Tool Programmers$83,963 · +10% · 15 programs here
No regional figures for this program's city
Reedley is not one of the metropolitan or rural areas California names when it publishes wages and openings. A neighbouring area's figures would look exactly like a correct answer, so none are shown and the statewide figures stand alone. About half of California's programs are in this position.
Industrial Engineering Technologists and Technicians
Job ads may call this: Quality Technician · Service Technician · Engineering Technician · Business Process Analyst
Some of what people in this job do. The Department rates how important each one is, and they appear in that order.
- Compile and evaluate statistical data to determine and maintain quality and reliability of products.
- Test selected products at specified stages in the production process for performance characteristics or adherence to specifications.
- Study time, motion, methods, or speed involved in maintenance, production, or other operations to establish standard production rate or improve efficiency.
- Read worker logs, product processing sheets, or specification sheets to verify that records adhere to quality assurance specifications.
Show 3 more things this job involves
- Verify that equipment is being operated and maintained according to quality assurance standards by observing worker performance.
- Evaluate industrial operations for compliance with permits or regulations related to the generation, storage, treatment, transportation, or disposal of hazardous materials or waste.
- Aid in planning work assignments in accordance with worker performance, machine capacity, production schedules, or anticipated delays.
- Typical pay in California
- $81,283per year
- Projected openings
- 5,290
- Projected change
- +7%
- Usually needs
- Associate's degree
Getting in
- Experience needed first
- None
- Training after you are hired
- None
No earlier job experience is expected, and new hires are not put through a long training period. For work like this, a program is usually the way in.
These are the federal government's answers for the occupation, not rules this provider sets. California publishes the same two answers for every one of these jobs.
What people in this job actually studied
Most common: Started college, no degree — 28% of the people doing this work.
California says this job usually needs: Associate's degree. 57% of the people doing it went less far than that.
- No high school diploma
- 4%
- High school diploma
- 25%
- Started college, no degree
- 28%
- Two-year degree
- 19%
- Four-year degree
- 19%
- Master's degree
- 4%
- Doctorate or professional degree
- 0.9%
This counts people already doing this job, across the whole United States. Every other figure on this page is California's, and the federal government publishes no state version of this one. It is what people happen to have, not a rule about who gets hired. A small row does not mean you would be turned away, and a large one is not a promise of a job.
Machinists
Pay, hiring, and what people studied
Job ads may call this: Machinist · Gear Machinist · Tool Room Machinist · Production Machinist
- Calculate dimensions or tolerances, using instruments, such as micrometers or vernier calipers.
- Machine parts to specifications, using machine tools, such as lathes, milling machines, shapers, or grinders.
- Measure, examine, or test completed units to check for defects and ensure conformance to specifications, using precision instruments, such as micrometers.
- Set up, adjust, or operate basic or specialized machine tools used to perform precision machining operations.
Show 2 more things this job involves
- Program computers or electronic instruments, such as numerically controlled machine tools.
- Study sample parts, blueprints, drawings, or engineering information to determine methods or sequences of operations needed to fabricate products.
- Typical pay in California
- $58,495per year
- Projected openings
- 18,420
- Projected change
- -1.6%
- Usually needs
- High school diploma or equivalent
Getting in
- Experience needed first
- None
- Training after you are hired
- More than a year
New hires are trained on the job for more than a year after they start. The classroom part is the beginning of this work, not the whole of it.
What people in this job actually studied
Most common: High school diploma — 45% of the people doing this work.
California says this job usually needs: High school diploma or equivalent. 9% of the people doing it went less far than that.
- No high school diploma
- 9%
- High school diploma
- 45%
- Started college, no degree
- 27%
- Two-year degree
- 13%
- Four-year degree
- 4%
- Master's degree
- 0.4%
- Doctorate or professional degree
- 0.2%
Computer Numerically Controlled Tool Operators
Pay, hiring, and what people studied
Job ads may call this: Machine Operator · Machine Set Up Operator · CNC Operator (Computer Numerical Control Operator) · CNC Machinist (Computer Numerical Control Machinist)
- Measure dimensions of finished workpieces to ensure conformance to specifications, using precision measuring instruments, templates, and fixtures.
- Set up and operate computer-controlled machines or robots to perform one or more machine functions on metal or plastic workpieces.
- Mount, install, align, and secure tools, attachments, fixtures, and workpieces on machines, using hand tools and precision measuring instruments.
- Review program specifications or blueprints to determine and set machine operations and sequencing, finished workpiece dimensions, or numerical control sequences.
Show 2 more things this job involves
- Stop machines to remove finished workpieces or to change tooling, setup, or workpiece placement, according to required machining sequences.
- Listen to machines during operation to detect sounds such as those made by dull cutting tools or excessive vibration, and adjust machines to compensate for problems.
- Typical pay in California
- $57,799per year
- Projected openings
- 16,320
- Projected change
- -11.5%
- Usually needs
- High school diploma or equivalent
Getting in
- Experience needed first
- None
- Training after you are hired
- 1 to 12 months
What people in this job actually studied
Most common: High school diploma — 41% of the people doing this work.
California says this job usually needs: High school diploma or equivalent. 10% of the people doing it went less far than that.
- No high school diploma
- 10%
- High school diploma
- 41%
- Started college, no degree
- 26%
- Two-year degree
- 12%
- Four-year degree
- 9%
- Master's degree
- 0.9%
- Doctorate or professional degree
- 0.7%
Program details
This program provides in-person instruction only.
A program that prepares individuals to apply technical knowledge and skills to operate computer numerically controlled CNC machine tools such as lathes mills precision measuring tools and related attachments and accessories to perform machining functions such as cutting drilling shaping and finishing products and component parts. Includes instruction in CNC terminology setup programming operations and troubleshooting blueprint reading machining lathe and mill operations technical mathematics computer literacy CAD CAM systems shop and safety practices equipment capabilities and regulations and laws.
Someone else may be able to pay for this
This program was on California's Eligible Training Provider List when the state last reported it to the U.S. Department of Labor (2026-08-04). Programs on that list can be paid for through an Individual Training Account. Listings are renewed periodically and can lapse, so a program listed when the state last reported may not be listed today. Ask before you rely on it.
The place to ask is an America's Job Center of California
Tulare County Employment Connection - DinubaAffiliate site
Phone: 559-406-1001 or 559-591-5701
400 West Tulare StreetPrroteus Suite CDinuba, CA 93618about 7.7 miles away
Hours: Mon - Fri 8am- 5pm
Parlier-Workforce ConnectionAffiliate site
Phone: 559-230-4400
13660 East Manning AveSuite 103Parlier, CA 93648about 8.6 miles away
Hours: Monday - Friday 8:00am - 5:00pm
Reverend Swillis Neighborhood Youth Center (NYC)Affiliate site
Phone: 559-264-1048
1805 E. California AvenueReverend Swills Neighborhood Youth CenterFresno, CA 93706about 22.2 miles away
Hours: Monday-Friday 8:30 am - 5:00pm.
Distances are straight-line, so the drive is longer. Call before you travel: opening hours here are as the federal directory published them, and the state notes its own staff are not present at every location.
Find a center anywhere in California, and check what is on the list today:
CareerOneStop — American Job Center Finder (U.S. DOL) · California EDD — Office Locator · California EDD — Eligible Training Provider List
How this gets paid for, and what to ask →
Whether a person can have a program paid for is decided by their local workforce development board and the America's Job Center staff who interview them — not by this site, and not by the training provider. California has 45 local workforce development areas and each sets its own policies, so the answer can differ between two people in neighboring counties. Nothing here is a promise of funding or a determination of eligibility.
The rules cited here, and the state and federal sites linked to, are published in English.
How this site gets its figures, and what they do not tell you →