Not a California state website. An independent project built from public data.
Afterward · CA

California training programs, and what happened to the people who took them

Español (inicio)

← Back to search

W301-CS/AL/SS - GTAW BASIC AWS D9.1 SHEET METAL WELDING

California Welding Institute LLC · Lake Elsinore, CA

Cost
$7,800
Length
8 weeks
Working 6 months later
50%

Program names and program descriptions appear here in English, because that is the only language the federal and state records publish them in. Occupation titles are translated where O*NET publishes a Spanish name. Everything else on this page is translated.

What happened to people who took this

People enrolled
11

Small group — treat with caution

Finished the program
100%Based on 8 peopleTypical California program: 85% of 1,951 reportingThat median pools every California program that reported this measure, whatever its length, credential, or field, and leaves out the ones that reported nothing. It is a reference point, not a rating of this program.
Working 6 months later
50%Typical California program: 69% of 1,690 reportingThat median pools every California program that reported this measure, whatever its length, credential, or field, and leaves out the ones that reported nothing. It is a reference point, not a rating of this program.
Earnings in one quarter after
$20,000A single quarter of earnings, roughly three months, not a yearly salary. Do not compare it directly with the yearly pay shown for the occupation.Typical California program: $10,900 of 1,339 reportingThat median pools every California program that reported this measure, whatever its length, credential, or field, and leaves out the ones that reported nothing. It is a reference point, not a rating of this program.

The jobs this trains for

This describes the jobs people do, not the classes this program teaches. It comes from the U.S. Department of Labor, which asks people already doing the work. The Department publishes it in English only, so the job names and the sentences below stay in English on this page.

Shrinking -16%
California projects this job will shrink over the next ten years. Fewer openings may mean a harder search.

Trains for more than one job. The outlook shown is the weakest of them.

Related work California expects more of

The U.S. Department of Labor lists these as related to the job above, and California projects growth in them rather than decline. Related is not the same as interchangeable: the training, the licenses and the pay can all differ, and this program does not train for these. It is a place to start asking, not a recommendation.

No regional figures for this program

This program's ZIP code reaches into more than one of the labor-market areas California publishes, and nothing in the state's own area titles says which one it belongs to. Either answer would look exactly like a correct answer here, so neither is given and the statewide figures stand alone.

Welders, Cutters, Solderers, and Brazers

Job ads may call this: Wirer · Brazer · Welder · Solderer

Some of what people in this job do. The Department rates how important each one is, and they appear in that order.

  • Operate safety equipment and use safe work habits.
  • Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications.
  • Weld components in flat, vertical, or overhead positions.
  • Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments.
Show 4 more things this job involves
  • Detect faulty operation of equipment or defective materials and notify supervisors.
  • Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
  • Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
  • Mark or tag material with proper job number, piece marks, and other identifying marks as required.
Typical pay in California
$59,385per year
Projected openings
28,860
Projected change
+3.2%
Usually needs
High school diploma or equivalent

Getting in

Experience needed first
None
Training after you are hired
1 to 12 months

These are the federal government's answers for the occupation, not rules this provider sets. California publishes the same two answers for every one of these jobs.

Welding, Soldering, and Brazing Machine Setters, Operators, and Tenders

Pay, hiring, and what people studied

Job ads may call this: Fabricator · Mig Welder · Spot Welder · Braze Operator

  • Read blueprints, work orders, or production schedules to determine product or job instructions or specifications.
  • Inspect, measure, or test completed metal workpieces to ensure conformance to specifications, using measuring and testing devices.
  • Add chemicals or materials to workpieces or machines to facilitate bonding or to cool workpieces.
  • Record operational information on specified production reports.
Show 4 more things this job involves
  • Correct problems by adjusting controls or by stopping machines and opening holding devices.
  • Set up, operate, or tend welding machines that join or bond components to fabricate metal products or assemblies.
  • Select torch tips, alloys, flux, coil, tubing, or wire, according to metal types or thicknesses, data charts, or records.
  • Lay out, fit, or connect parts to be bonded, calculating production measurements, as necessary.
Typical pay in California
$50,057per year
Projected openings
1,830
Projected change
-16%
Usually needs
High school diploma or equivalent

Getting in

Experience needed first
None
Training after you are hired
1 to 12 months

Program details

This program provides in-person instruction only.

This course is intended for novice, beginner and intermediate level skill welders who want to work in HVAC, filming studios, commercial kitchen equipment, automotive or other work involving non-structural sheet metal. Exercises involve welding butt and T-joints in the flat, horizontal, vertical and overhead positions, using GTAW, on 14 gage stainless steel, aluminum and carbon steel.Students who successfully complete the course will also be eligible to apply to take the certification test.AWS D9.1 Sheet metal welder certification is to be paid for and scheduled separately from the course.

Provider's website →

Someone else may be able to pay for this

This program was on California's Eligible Training Provider List when the state last reported it to the U.S. Department of Labor (2026-09-18). Programs on that list can be paid for through an Individual Training Account. Listings are renewed periodically and can lapse, so a program listed when the state last reported may not be listed today. Ask before you rely on it.

Ask before you enroll, not after

The order the rules set out starts at the center rather than at the school. Before a center can find somebody eligible for training services it has to gather enough to decide, at a minimum through an interview, evaluation or assessment and career planning. Referring a person to the provider they have chosen and setting up the account both come after that, and both are the center's to do — the account is a payment agreement with the training provider, and it is the provider that is paid through it. So the call belongs before enrolling and before paying. Anyone who has already done either should still ask, and ask what it means for them.

The place to ask is an America's Job Center of California

  • Lake Elsinore Youth Opportunity CenterAffiliate site

    Phone: 951-471-8415

    400 West Graham AvenueLake Elsinore, CA 92530about 2.3 miles away

    Hours: Monday - Friday 8am - 5pm

  • Perris Youth Opportunity CenterAffiliate site

    Phone: 951-657-7105

    2560 N. Perris BlvdSuite J3 and J4Perris, CA 92571about 12.5 miles away

    Hours: Monday - Friday, 8:00 a.m. - 5:00 p.m., Third Saturday of the month 7:00am-3:30pm

  • Moreno Valley Youth Opportunity CenterAffiliate site

    Phone: Public Phone: 951-653-1311

    23080 Alessandro Blvd.Suite 236Moreno Valley, CA 92553about 17.7 miles away

    Hours: Monday - Friday 8 a.m. - 5 p.m.( Closed 12:30pm-1:30pm) Third Saturday of the month 7am-3:30pm

At a comprehensive center all the required partner programs can be reached; an affiliate site offers some of them. Distances are straight-line, so the drive is longer. Call before you travel: opening hours here are as the federal directory published them, and the state notes its own staff are not present at every location.

Find a center anywhere in California, and check what is on the list today:
CareerOneStop — American Job Center Finder (U.S. DOL) · California EDD — Office Locator · California EDD — Eligible Training Provider List

How this gets paid for, and what to ask →

Whether a person can have a program paid for is decided by their local workforce development board and the America's Job Center staff who interview them — not by this site, and not by the training provider. California has 45 local workforce development areas and each sets its own policies, so the answer can differ between two people in neighboring counties. Nothing here is a promise of funding or a determination of eligibility.

The rules cited here, and the state and federal sites linked to, are published in English.

How this site gets its figures, and what they do not tell you →