Manufacturing Hybrid
Technical Employment Training, Inc. · San Bernardino, CA
- Cost
- $7,700
- Length
- 18 weeks
- Working 6 months later
- 82%
Program names, program descriptions and occupation titles appear here in English, because that is the only language the federal and state records publish them in. Everything else on this page is translated.
What happened to people who took this
- People enrolled
- 59
- Finished the program
- 70%Based on 47 peopleTypical California program: 85% of 1,951 reportingThat median pools every California program that reported this measure, whatever its length, credential, or field, and leaves out the ones that reported nothing. It is a reference point, not a rating of this program.
- Working 6 months later
- 82%Typical California program: 69% of 1,690 reportingThat median pools every California program that reported this measure, whatever its length, credential, or field, and leaves out the ones that reported nothing. It is a reference point, not a rating of this program.
- Earnings in one quarter after
- $9,564A single quarter of earnings, roughly three months, not a yearly salary. Do not compare it directly with the yearly pay shown for the occupation.Typical California program: $10,900 of 1,339 reportingThat median pools every California program that reported this measure, whatever its length, credential, or field, and leaves out the ones that reported nothing. It is a reference point, not a rating of this program.
The jobs this trains for
This describes the jobs people do, not the classes this program teaches. It comes from the U.S. Department of Labor, which asks people already doing the work. The Department publishes it in English only, so the job names and the sentences below stay in English on this page.
Shrinking -11.5%
California projects this job will shrink over the next ten years. Fewer openings may mean a harder search.
Trains for more than one job. The outlook shown is the weakest of them.
Where California publishes a separate figure for Riverside-San Bernardino-Ontario MSA (Riverside and San Bernardino Counties), it appears beneath the statewide one. Statewide stays the headline: people who train here do not necessarily work here.
Industrial Engineering Technologists and Technicians
Job ads may call this: Quality Technician · Service Technician · Engineering Technician · Business Process Analyst
Some of what people in this job do. The Department rates how important each one is, and they appear in that order.
- Compile and evaluate statistical data to determine and maintain quality and reliability of products.
- Test selected products at specified stages in the production process for performance characteristics or adherence to specifications.
- Study time, motion, methods, or speed involved in maintenance, production, or other operations to establish standard production rate or improve efficiency.
- Read worker logs, product processing sheets, or specification sheets to verify that records adhere to quality assurance specifications.
Show 3 more things this job involves
- Verify that equipment is being operated and maintained according to quality assurance standards by observing worker performance.
- Evaluate industrial operations for compliance with permits or regulations related to the generation, storage, treatment, transportation, or disposal of hazardous materials or waste.
- Aid in planning work assignments in accordance with worker performance, machine capacity, production schedules, or anticipated delays.
What this pays in Riverside-San Bernardino-Ontario MSA (Riverside and San Bernardino Counties)
Each bar runs from the lowest-paid tenth to the highest-paid tenth. The darker middle is where half the people are, and the line is the median.
| Area | The lowest-paid tenth earn under | Half earn under | The highest-paid tenth earn over |
|---|---|---|---|
| Riverside-San Bernardino-Ontario MSA (Riverside and San Bernardino Counties) | $47,288 | $74,098 | $104,382 |
| Across California | $52,006 | $81,283 | $108,361 |
The federal Bureau of Labor Statistics' 2026 figures for Riverside-San Bernardino-Ontario MSA (Riverside and San Bernardino Counties) beside the same figures for the whole state. A region can sit well below or above the statewide spread, and the statewide number is the one most often quoted — so where they differ, the local row is the one that describes the work near this program.
- Typical pay in California
- $81,283per yearRiverside-San Bernardino-Ontario MSA: $76,340
- Projected openings
- 5,290Riverside-San Bernardino-Ontario MSA: 210
- Projected change
- +7%
- Usually needs
- Associate's degree
Getting in
- Experience needed first
- None
- Training after you are hired
- None
No earlier job experience is expected, and new hires are not put through a long training period. For work like this, a program is usually the way in.
These are the federal government's answers for the occupation, not rules this provider sets. California publishes the same two answers for every one of these jobs.
What people in this job actually studied
Most common: Started college, no degree — 28% of the people doing this work.
California says this job usually needs: Associate's degree. 57% of the people doing it went less far than that.
- No high school diploma
- 4%
- High school diploma
- 25%
- Started college, no degree
- 28%
- Two-year degree
- 19%
- Four-year degree
- 19%
- Master's degree
- 4%
- Doctorate or professional degree
- 0.9%
This counts people already doing this job, across the whole United States. Every other figure on this page is California's, and the federal government publishes no state version of this one. It is what people happen to have, not a rule about who gets hired. A small row does not mean you would be turned away, and a large one is not a promise of a job.
Computer Numerically Controlled Tool Operators
Pay, hiring, and what people studied
Job ads may call this: Machine Operator · Machine Set Up Operator · CNC Operator (Computer Numerical Control Operator) · CNC Machinist (Computer Numerical Control Machinist)
- Measure dimensions of finished workpieces to ensure conformance to specifications, using precision measuring instruments, templates, and fixtures.
- Set up and operate computer-controlled machines or robots to perform one or more machine functions on metal or plastic workpieces.
- Mount, install, align, and secure tools, attachments, fixtures, and workpieces on machines, using hand tools and precision measuring instruments.
- Review program specifications or blueprints to determine and set machine operations and sequencing, finished workpiece dimensions, or numerical control sequences.
Show 2 more things this job involves
- Stop machines to remove finished workpieces or to change tooling, setup, or workpiece placement, according to required machining sequences.
- Listen to machines during operation to detect sounds such as those made by dull cutting tools or excessive vibration, and adjust machines to compensate for problems.
What this pays in Riverside-San Bernardino-Ontario MSA (Riverside and San Bernardino Counties)
Each bar runs from the lowest-paid tenth to the highest-paid tenth. The darker middle is where half the people are, and the line is the median.
| Area | The lowest-paid tenth earn under | Half earn under | The highest-paid tenth earn over |
|---|---|---|---|
| Riverside-San Bernardino-Ontario MSA (Riverside and San Bernardino Counties) | $39,777 | $50,589 | $71,638 |
| Across California | $40,575 | $57,799 | $78,593 |
The federal Bureau of Labor Statistics' 2026 figures for Riverside-San Bernardino-Ontario MSA (Riverside and San Bernardino Counties) beside the same figures for the whole state. A region can sit well below or above the statewide spread, and the statewide number is the one most often quoted — so where they differ, the local row is the one that describes the work near this program.
- Typical pay in California
- $57,799per yearRiverside-San Bernardino-Ontario MSA: $49,565
- Projected openings
- 16,320Riverside-San Bernardino-Ontario MSA: 1,550
- Projected change
- -11.5%
- Usually needs
- High school diploma or equivalent
Getting in
- Experience needed first
- None
- Training after you are hired
- 1 to 12 months
What people in this job actually studied
Most common: High school diploma — 41% of the people doing this work.
California says this job usually needs: High school diploma or equivalent. 10% of the people doing it went less far than that.
- No high school diploma
- 10%
- High school diploma
- 41%
- Started college, no degree
- 26%
- Two-year degree
- 12%
- Four-year degree
- 9%
- Master's degree
- 0.9%
- Doctorate or professional degree
- 0.7%
Computer Numerically Controlled Tool Programmers
Pay, hiring, and what people studied
Job ads may call this: Programmer · Numerical Control Programmer (NC Programmer) · CNC Tech (Computer Numerical Control Technician) · CAD Programmer (Computer-Aided Design Programmer)
- Determine the sequence of machine operations, and select the proper cutting tools needed to machine workpieces into the desired shapes.
- Analyze job orders, drawings, blueprints, specifications, printed circuit board pattern films, and design data to calculate dimensions, tool selection, machine speeds, and feed rates.
- Observe machines on trial runs or conduct computer simulations to ensure that programs and machinery will function properly and produce items that meet specifications.
- Write programs in the language of a machine's controller and store programs on media, such as punch tapes, magnetic tapes, or disks.
Show 2 more things this job involves
- Determine reference points, machine cutting paths, or hole locations, and compute angular and linear dimensions, radii, and curvatures.
- Enter computer commands to store or retrieve parts patterns, graphic displays, or programs that transfer data to other media.
What this pays in Riverside-San Bernardino-Ontario MSA (Riverside and San Bernardino Counties)
Each bar runs from the lowest-paid tenth to the highest-paid tenth. The darker middle is where half the people are, and the line is the median.
| Area | The lowest-paid tenth earn under | Half earn under | The highest-paid tenth earn over |
|---|---|---|---|
| Riverside-San Bernardino-Ontario MSA (Riverside and San Bernardino Counties) | $50,415 | $71,833 | $121,409 |
| Across California | $57,176 | $83,963 | $128,885 |
The federal Bureau of Labor Statistics' 2026 figures for Riverside-San Bernardino-Ontario MSA (Riverside and San Bernardino Counties) beside the same figures for the whole state. A region can sit well below or above the statewide spread, and the statewide number is the one most often quoted — so where they differ, the local row is the one that describes the work near this program.
- Typical pay in California
- $83,963per yearRiverside-San Bernardino-Ontario MSA: $72,444
- Projected openings
- 3,190Riverside-San Bernardino-Ontario MSA: 330
- Projected change
- +10%
- Usually needs
- Postsecondary non-degree award
Getting in
- Experience needed first
- None
- Training after you are hired
- 1 to 12 months
What people in this job actually studied
Most common: High school diploma — 41% of the people doing this work.
California says this job usually needs: Postsecondary non-degree award. That is not one of the steps below, so there is no way to count how many people meet it.
- No high school diploma
- 10%
- High school diploma
- 41%
- Started college, no degree
- 26%
- Two-year degree
- 12%
- Four-year degree
- 9%
- Master's degree
- 0.9%
- Doctorate or professional degree
- 0.7%
It is also measured on a different scale from “Usually needs” above, so the two cannot be subtracted from one another.
Program details
This is a hybrid or blended program providing both in-person and online instruction.
A program that prepares individuals to apply basic engineering principles and technical skills to the identification and resolution of production problems in the manufacture of products. Provides manufacturing trades education and hands-on machinist skills training to prepare students for National Institute for Metalworking Skills (NIMS) credentials, utilizes technology and academics, in a real work and interactive educational setting, with nationally recognized credentials and certifications.
Someone else may be able to pay for this
This program was on California's Eligible Training Provider List when the state last reported it to the U.S. Department of Labor (2026-08-04). Programs on that list can be paid for through an Individual Training Account. Listings are renewed periodically and can lapse, so a program listed when the state last reported may not be listed today. Ask before you rely on it.
The place to ask is an America's Job Center of California
East Valley America`s Job Center of California-Affiliate site
Phone: 909-382-0440
500 Inland Center DriveSan Bernadino County Workforce Development Suite 508San Bernardino, CA 92408about 1.6 miles away
Hours: Monday - Friday 8:00a.m. - 5:00p.m.
Has a veterans' representative
Riverside Workforce Development Center AJCCComprehensive center
Phone: 951-955-3100
1325 Spruce StreetSuite 110Riverside, CA 92507about 7.4 miles away
Hours: Monday - Friday 8:00am - 5:00pm Closed Holidays
Has a veterans' representative
Rubidoux Youth Opportunity CenterAffiliate site
Phone: 951-683-9622
5656 Mission BlvdRiverside, CA 92509about 9.8 miles away
Hours: Monday - Friday 8:00am - 5:00pm
Distances are straight-line, so the drive is longer. Call before you travel: opening hours here are as the federal directory published them, and the state notes its own staff are not present at every location.
Find a center anywhere in California, and check what is on the list today:
CareerOneStop — American Job Center Finder (U.S. DOL) · California EDD — Office Locator · California EDD — Eligible Training Provider List
How this gets paid for, and what to ask →
Whether a person can have a program paid for is decided by their local workforce development board and the America's Job Center staff who interview them — not by this site, and not by the training provider. California has 45 local workforce development areas and each sets its own policies, so the answer can differ between two people in neighboring counties. Nothing here is a promise of funding or a determination of eligibility.
The rules cited here, and the state and federal sites linked to, are published in English.
How this site gets its figures, and what they do not tell you →