Computer Aided Drafting (CAD) Certificate of Accomplishment
City College of San Francisco · San Francisco, CA
- Cost
- $1,098
- Length
- 53 weeks
- Working 6 months later
- Not reported
Program names, program descriptions and occupation titles appear here in English, because that is the only language the federal and state records publish them in. Everything else on this page is translated.
What happened to people who took this
No outcomes reported for this program
About a third of California programs report nothing. That is a fact about the program's reporting, not evidence that it works or does not.
The jobs this trains for
This describes the jobs people do, not the classes this program teaches. It comes from the U.S. Department of Labor, which asks people already doing the work. The Department publishes it in English only, so the job names and the sentences below stay in English on this page.
Shrinking -15.8%
California projects this job will shrink over the next ten years. Fewer openings may mean a harder search.
Trains for more than one job. The outlook shown is the weakest of them.
Related work California expects more of
The U.S. Department of Labor lists these as related to the job above, and California projects growth in them rather than decline. Related is not the same as interchangeable: the training, the licences and the pay can all differ, and this program does not train for these. It is a place to start asking, not a recommendation.
- Industrial Engineers$128,088 · +11.9% · 8 programs here
- Engineers, All Other$134,513 · +6.4% · 6 programs here
- Mechanical Engineering Technologists and Technicians$89,836 · +5.4% · 6 programs here
- Civil Engineers$125,929 · +8.2% · 5 programs here
- Mechanical Engineers$134,564 · +11.5% · 4 programs here
- Electrical Engineers$148,072 · +7.3% · 3 programs here
Where California publishes a separate figure for San Francisco-San Mateo-Redwood City MD (San Francisco and San Mateo Counties), it appears beneath the statewide one. Statewide stays the headline: people who train here do not necessarily work here.
Architectural and Civil Drafters
Job ads may call this: Draftsman · Draftsperson · Civil Drafter · Drafting Technician
Some of what people in this job do. The Department rates how important each one is, and they appear in that order.
- Produce drawings, using computer-assisted drafting systems (CAD) or drafting machines, or by hand, using compasses, dividers, protractors, triangles, and other drafting devices.
- Draft plans and detailed drawings for structures, installations, and construction projects, such as highways, sewage disposal systems, and dikes, working from sketches or notes.
- Coordinate structural, electrical, and mechanical designs and determine a method of presentation to graphically represent building plans.
- Analyze building codes, by-laws, space and site requirements, and other technical documents and reports to determine their effect on architectural designs.
Show 4 more things this job involves
- Draw maps, diagrams, and profiles, using cross-sections and surveys, to represent elevations, topographical contours, subsurface formations, and structures.
- Lay out and plan interior room arrangements for commercial buildings, using computer-assisted drafting (CAD) equipment and software.
- Supervise and train other technologists, technicians, and drafters.
- Determine the order of work and method of presentation, such as orthographic or isometric drawing.
What this pays in San Francisco-San Mateo-Redwood City MD (San Francisco and San Mateo Counties)
Each bar runs from the lowest-paid tenth to the highest-paid tenth. The darker middle is where half the people are, and the line is the median.
| Area | The lowest-paid tenth earn under | Half earn under | The highest-paid tenth earn over |
|---|---|---|---|
| San Francisco-San Mateo-Redwood City MD (San Francisco and San Mateo Counties) | $66,638 | $84,567 | $132,477 |
| Across California | $51,245 | $78,662 | $117,808 |
The federal Bureau of Labor Statistics' 2026 figures for San Francisco-San Mateo-Redwood City MD (San Francisco and San Mateo Counties) beside the same figures for the whole state. A region can sit well below or above the statewide spread, and the statewide number is the one most often quoted — so where they differ, the local row is the one that describes the work near this program.
- Typical pay in California
- $78,662per yearSan Francisco-San Mateo-Redwood City MD: $79,027
- Projected openings
- 10,740San Francisco-San Mateo-Redwood City MD: 880
- Projected change
- +7%
- Usually needs
- Associate's degree
Getting in
- Experience needed first
- None
- Training after you are hired
- None
No earlier job experience is expected, and new hires are not put through a long training period. For work like this, a program is usually the way in.
These are the federal government's answers for the occupation, not rules this provider sets. California publishes the same two answers for every one of these jobs.
What people in this job actually studied
Most common: Two-year degree — 32% of the people doing this work.
California says this job usually needs: Associate's degree. 40% of the people doing it went less far than that.
- No high school diploma
- 1%
- High school diploma
- 10%
- Started college, no degree
- 29%
- Two-year degree
- 32%
- Four-year degree
- 23%
- Master's degree
- 5%
- Doctorate or professional degree
- 0.7%
This counts people already doing this job, across the whole United States. Every other figure on this page is California's, and the federal government publishes no state version of this one. It is what people happen to have, not a rule about who gets hired. A small row does not mean you would be turned away, and a large one is not a promise of a job.
Electrical and Electronics Drafters
Pay, hiring, and what people studied
Job ads may call this: Drafter · Designer · Layout Designer · Staking Engineer
- Draft detail and assembly drawings of design components, circuitry or printed circuit boards, using computer-assisted equipment or standard drafting techniques and devices.
- Draft working drawings, wiring diagrams, wiring connection specifications, or cross-sections of underground cables, as required for instructions to installation crew.
- Assemble documentation packages and produce drawing sets to be checked by an engineer or an architect.
- Review completed construction drawings and cost estimates for accuracy and conformity to standards and regulations.
Show 3 more things this job involves
- Consult with engineers to discuss or interpret design concepts, or determine requirements of detailed working drawings.
- Confer with engineering staff and other personnel to resolve problems.
- Measure factors that affect installation and arrangement of equipment, such as distances to be spanned by wire and cable.
What this pays in San Francisco-San Mateo-Redwood City MD (San Francisco and San Mateo Counties)
Each bar runs from the lowest-paid tenth to the highest-paid tenth. The darker middle is where half the people are, and the line is the median.
| Area | The lowest-paid tenth earn under | Half earn under | The highest-paid tenth earn over |
|---|---|---|---|
| San Francisco-San Mateo-Redwood City MD (San Francisco and San Mateo Counties) | $62,060 | $84,909 | $156,164 |
| Across California | $52,037 | $80,502 | $150,920 |
The federal Bureau of Labor Statistics' 2026 figures for San Francisco-San Mateo-Redwood City MD (San Francisco and San Mateo Counties) beside the same figures for the whole state. A region can sit well below or above the statewide spread, and the statewide number is the one most often quoted — so where they differ, the local row is the one that describes the work near this program.
- Typical pay in California
- $80,502per yearSan Francisco-San Mateo-Redwood City MD: $101,022
- Projected openings
- 2,120San Francisco-San Mateo-Redwood City MD: 90
- Projected change
- -10%
- Usually needs
- Associate's degree
Getting in
- Experience needed first
- None
- Training after you are hired
- None
No earlier job experience is expected, and new hires are not put through a long training period. For work like this, a program is usually the way in.
What people in this job actually studied
Most common: Two-year degree — 35% of the people doing this work.
California says this job usually needs: Associate's degree. 40% of the people doing it went less far than that.
- No high school diploma
- 2%
- High school diploma
- 12%
- Started college, no degree
- 26%
- Two-year degree
- 35%
- Four-year degree
- 20%
- Master's degree
- 4%
- Doctorate or professional degree
- 0.9%
Drafters, All Other
Pay, hiring, and what people studied
The Department publishes no list of daily tasks for this job. This is how it describes the work instead.
All drafters not listed separately.
What this pays in San Francisco-San Mateo-Redwood City MD (San Francisco and San Mateo Counties)
Each bar runs from the lowest-paid tenth to the highest-paid tenth. The darker middle is where half the people are, and the line is the median.
| Area | The lowest-paid tenth earn under | Half earn under | The highest-paid tenth earn over |
|---|---|---|---|
| San Francisco-San Mateo-Redwood City MD (San Francisco and San Mateo Counties) | $66,758 | $79,147 | $132,105 |
| Across California | $50,577 | $75,444 | $107,209 |
The federal Bureau of Labor Statistics' 2026 figures for San Francisco-San Mateo-Redwood City MD (San Francisco and San Mateo Counties) beside the same figures for the whole state. A region can sit well below or above the statewide spread, and the statewide number is the one most often quoted — so where they differ, the local row is the one that describes the work near this program.
- Typical pay in California
- $75,444per yearSan Francisco-San Mateo-Redwood City MD: $83,096
- Projected openings
- 1,190San Francisco-San Mateo-Redwood City MD: 80
- Projected change
- -15.8%
- Usually needs
- Associate's degree
Getting in
- Experience needed first
- None
- Training after you are hired
- None
No earlier job experience is expected, and new hires are not put through a long training period. For work like this, a program is usually the way in.
What people in this job actually studied
Most common: Two-year degree — 35% of the people doing this work.
California says this job usually needs: Associate's degree. 40% of the people doing it went less far than that.
- No high school diploma
- 2%
- High school diploma
- 12%
- Started college, no degree
- 26%
- Two-year degree
- 35%
- Four-year degree
- 20%
- Master's degree
- 4%
- Doctorate or professional degree
- 0.9%
Program details
This program provides online instruction, e-learning, or distance learning only.
This certificate includes instruction in technical drawing and the use of software tools to create 2-dimensional and 3-dimensional models. Students will gain significant practice in creating models through extensive lab work using industry standard software tools. This certificate program provides skills valuable to machinists, manufacturers, architects, technicians, and engineers in industries where high quality technical drawings are needed.For more info, visit department at:https://www.ccsf.
Someone else may be able to pay for this
This program was on California's Eligible Training Provider List when the state last reported it to the U.S. Department of Labor (2026-08-04). Programs on that list can be paid for through an Individual Training Account. Listings are renewed periodically and can lapse, so a program listed when the state last reported may not be listed today. Ask before you rely on it.
The place to ask is an America's Job Center of California
Human Services Agency of San FranciscoAffiliate site
Phone: 415-401-4800
3120 Mission StreetHSA-Mission OfficeSan Francisco, CA 94110about 2.2 miles away
Hours: Monday - Friday 8 a.m. - 5 p.m.
EDD Workforce Service - San Francisco Civic CenterAffiliate site
Phone: 415-749-7503
801 Turk StreetEDD BuildingSan Francisco, CA 94102-3117about 4.4 miles away
Hours: Monday - Friday, 8:00 a.m. - 5:00 p.m.
Has a veterans' representative
Goodwill Centralized Job CenterComprehensive center
Phone: 415-575-4570
750 Post StreetGoodwill of the San Francisco BaySan Francisco, CA 94109about 4.9 miles away
Hours: Monday - Friday 10:00am-4:00pm
Has a veterans' representative
Distances are straight-line, so the drive is longer. Call before you travel: opening hours here are as the federal directory published them, and the state notes its own staff are not present at every location.
Find a center anywhere in California, and check what is on the list today:
CareerOneStop — American Job Center Finder (U.S. DOL) · California EDD — Office Locator · California EDD — Eligible Training Provider List
How this gets paid for, and what to ask →
Whether a person can have a program paid for is decided by their local workforce development board and the America's Job Center staff who interview them — not by this site, and not by the training provider. California has 45 local workforce development areas and each sets its own policies, so the answer can differ between two people in neighboring counties. Nothing here is a promise of funding or a determination of eligibility.
The rules cited here, and the state and federal sites linked to, are published in English.
How this site gets its figures, and what they do not tell you →